Disassembly

LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: DISASSEMBLY

1. REMOVE REAR COMBINATION LIGHT GASKET

(a) Remove the rear combination light gasket.





NOTICE:
* Be sure to remove all the traces of the old gasket from the body.
* Do not reuse the removed gasket. Be sure to install a new rear combination light gasket to prevent water ingress.
2. REMOVE TAIL LIGHT BULB

(a) Turn the tail light bulb and rear combination light socket and wire sub-assembly in the direction indicated by the arrow shown in the illustration, and remove them as a unit.





(b) Remove the tail light bulb from the rear combination light socket and wire sub-assembly.

3. REMOVE REAR TURN SIGNAL LIGHT BULB

(a) Turn the rear turn signal light bulb and rear combination light socket and wire sub-assembly in the direction indicated by the arrow shown in the illustration, and remove them as a unit.





(b) Remove the rear turn signal light bulb from the rear combination light socket and wire sub-assembly.

4. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY

(a) Disengage the claw and remove the rear combination light socket and wire sub-assembly.