Cylinder Head Assembly

Cylinder head bolts








Step 1 36 Nm (367 kgf-cm, 26 ft-lb)
Step 2 another 90°
Step 3 additional 90°

Inspect cylinder head bolts

Standard diameter 10.85 to 11.00 mm (0.4272 to 0.4330 in.)
Minimum diameter 10.70 mm (0.4212 in.)

If the diameter is less than the minimum, replace the cylinder head bolt

Standard Warpage:





Maximum Warpage:





Camshaft bearing cap

1st 10 Nm (102 kgf-cm, 7 ft lb)
2nd 16 Nm (163 kgf-cm, 12 ft lb)

Intake manifold Specifications

Exhaust manifold Specifications

Camshaft gear Specifications