Up to 08/2009

WIPER / WASHER: WIPER AND WASHER SYSTEM: Headlight Signal Circuit
- Headlight Signal Circuit

DESCRIPTION

The headlight cleaner control relay detects the low beam headlights status.

WIRING DIAGRAM





INSPECTION PROCEDURE

NOTICE:
First check that the low beam headlights operate normally.

PROCEDURE

1. CHECK HARNESS AND CONNECTOR (LOW BEAM HEADLIGHT RELAY - ECU)

(a) Disconnect the A33 headlight cleaner control relay connector.





(b) Measure the voltage according to the value(s) in the table below.

Standard Voltage:





Text in Illustration





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE