Intuitive Parking Assist System

PARK ASSIST / MONITORING: INTUITIVE PARKING ASSIST SYSTEM: CUSTOMIZE PARAMETERS

1. CUSTOMIZE INTUITIVE PARKING ASSIST SYSTEM

HINT
The following items can be customized.

NOTICE:
* When the customer requests a change in a function, first make sure that the function can be customized.
* Be sure to make a note of the current settings before customizing.
* When troubleshooting a function, first make sure that the function is set to the default setting.

(a) Customizing with the Techstream

(1) Connect the Techstream to the DLC3.

(2) Turn the engine switch on (IG).

(3) Turn the Techstream on.

(4) Enter the following menus: Customize Setting / Intuitive P/A / Warning, Sensor or Display.

(5) Select the setting by referring to the table below.

Warning





* *1: w/o Side Monitor System

* *2: w/ Side Monitor System

(b) Customizing with Multi-display

(1) Turn the engine switch on (IG).

(2) Enter the following menus: Setup / Vehicle / LEXUS Park Assist.

(3) Select the setting by referring to the table below.





* *1: w/o Side Monitor System

* *2: w/ Side Monitor System