Operation CHARM: Car repair manuals for everyone.

Display Mode Signal Circuit Between Multi-Display Controller and Television Display Assembly





AUDIO / VIDEO: REAR SEAT ENTERTAINMENT SYSTEM: Display Mode Signal Circuit between Multi-display Controller and Television Display Assembly
- Display Mode Signal Circuit between Multi-display Controller and Television Display Assembly

DESCRIPTION

This is the display mode signal circuit between the multi-display controller sub-assembly and television display assembly.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. CHECK HARNESS AND CONNECTOR (MULTI-DISPLAY CONTROLLER - TELEVISION DISPLAY)

(a) Disconnect the H16 multi-display controller sub-assembly connector.

(b) Disconnect the g1 television display assembly RH connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table