Display Signal Circuit Between Multi-Display Controller and Television Display
AUDIO / VIDEO: REAR SEAT ENTERTAINMENT SYSTEM: Display Signal Circuit between Multi-display Controller and Television Display
- Display Signal Circuit between Multi-display Controller and Television Display
DESCRIPTION
This is the display signal circuit between the multi-display controller sub-assembly and television display assembly.
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
1. CHECK HARNESS AND CONNECTOR (MULTI-DISPLAY CONTROLLER - TELEVISION DISPLAY ASSEMBLY)
(a) Disconnect the H17 multi-display controller sub-assembly connector.
(b) Disconnect the g2 television display assembly LH connector.
(c) Disconnect the g1 television display assembly RH connector.
(d) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table