Display Signal Circuit Between Video Terminal and Multi-Display Controller

AUDIO / VIDEO: REAR SEAT ENTERTAINMENT SYSTEM: Display Signal Circuit between Video Terminal and Multi-display Controller
- Display Signal Circuit between Video Terminal and Multi-display Controller

DESCRIPTION

This is the display signal circuit between the video terminal and multi-display controller sub-assembly.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. CHECK HARNESS AND CONNECTOR (VIDEO TERMINAL - MULTI-DISPLAY CONTROLLER)

(a) Disconnect the T1 rear console compartment door sub-assembly (video terminal) connector.

(b) Disconnect the H18 multi-display controller sub-assembly connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table