Sound Signal Circuit Between Multi-Display Controller and Head-Phone Terminal
AUDIO / VIDEO: REAR SEAT ENTERTAINMENT SYSTEM: Sound Signal Circuit between Multi-display Controller and Head-phone Terminal
- Sound Signal Circuit between Multi-display Controller and Head-phone Terminal
DESCRIPTION
This is the sound signal circuit between the multi-display controller sub-assembly and headphone terminal.
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
1. CHECK HARNESS AND CONNECTOR (MULTI-DISPLAY CONTROLLER - HEADPHONE TERMINAL)
(a) Disconnect the H17 multi-display controller sub-assembly connector.
(b) Disconnect the T1 rear console compartment door sub-assembly (headphone terminal) connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table