Stereo Component Amplifier Power Source Circuit
AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM (w/ Multi-display): Stereo Component Amplifier Power Source Circuit
- Stereo Component Amplifier Power Source Circuit
DESCRIPTION
This circuit provides power to the stereo component amplifier assembly.
WIRING DIAGRAM
INSPECTION PROCEDURE
NOTICE:
Inspect the fuses for circuits related to this system before performing the following inspection procedure.
PROCEDURE
1. CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER - BATTERY AND BODY GROUND)
(a) for CD Changer Model:
(1) Disconnect the H6 stereo component amplifier assembly connector.
(2) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(3) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration
(b) for DVD Changer Model:
(1) Disconnect the R32 stereo component amplifier assembly connector.
(2) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(3) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table