Removal

THEFT DETERRENT / KEYLESS ENTRY: ELECTRICAL KEY OSCILLATOR (for Rear Floor): REMOVAL

1. REMOVE REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat)

(a) Remove the rear No. 2 seat assembly Removal.

2. REMOVE REAR NO. 1 SEAT ASSEMBLY (w/ Rear No. 1 Seat)

(a) for 60/40 Split Double-folding Seat Type LH Side:

Remove the rear No. 1 seat assembly Removal.

(b) for 60/40 Split Double-folding Seat Type RH Side:

Remove the rear No. 1 seat assembly Removal.

(c) for 60/40 Split Slide Walk-in Seat Type LH Side:

Remove the rear No. 1 seat assembly Removal.

(d) for 60/40 Split Slide Walk-in Seat Type RH Side:

Remove the rear No. 1 seat assembly Removal.

3. REMOVE REAR NO. 1 FLOOR STEP COVER (w/ Rear No. 2 Seat) Removal

4. REMOVE QUARTER SCUFF PLATE LH (w/ Rear No. 2 Seat) Removal

5. REMOVE QUARTER SCUFF PLATE RH (w/ Rear No. 2 Seat) Removal

6. REMOVE REAR DOOR SCUFF PLATE LH Removal

7. REMOVE REAR DOOR SCUFF PLATE RH Removal

8. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH Removal

9. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH Removal

10. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover) Removal

11. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear No. 2 Seat) Removal

12. REMOVE NO. 1 DECK BOARD SUB-ASSEMBLY (w/o Rear No. 2 Seat) Removal

13. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE (w/o Rear No. 2 Seat) Removal

14. REMOVE REAR FLOOR CARPET ASSEMBLY (w/o Rear No. 2 Seat) Removal

15. REMOVE REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER Removal

16. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK Removal

17. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover) Removal

18. REMOVE FRONT DECK SIDE TRIM COVER (w/ Tonneau Cover) Removal

19. REMOVE ASSIST GRIP PLUG (w/ Rear No. 2 Seat) Removal

20. REMOVE ASSIST GRIP SUB-ASSEMBLY (w/ Rear No. 2 Seat) Removal

21. REMOVE REAR SEATBACK LOCK CONTROL LEVER BASE LH (w/o Rear No. 2 Seat) Removal

22. REMOVE REAR SEATBACK LOCK CONTROL LEVER BASE RH (w/o Rear No. 2 Seat) Removal

23. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH Removal

24. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH Removal

25. REMOVE INDOOR NO. 2 ELECTRICAL KEY ANTENNA ASSEMBLY

(a) Fold back the front floor carpet assembly.





(b) Disconnect the connector.

(c) Detach the 2 claws and remove the indoor No. 2 electrical key antenna assembly.