Rear Power Seat Control System

SEAT: REAR POWER SEAT CONTROL SYSTEM: INITIALIZATION

1. INITIAL POSITION MEMORIZATION

NOTICE:
When the following actions are performed, initial position memorization is necessary:

* The fold seat control ECU is replaced with a new one.
* The fold seat control ECU initial position memory is reset.

HINT
When the engine switch is turned to on (IG) before performing initial position memorization, a buzzer sounds continuously while the engine switch is on (IG). Once initial position memorization is complete, the buzzer stops.

(a) Initial Position Memorization

(1) Hold the No. 1 fold seat switch assembly or No. 2 fold seat switch assembly in the return position until the seat cushion is completely restored to its seating position and the seatback is fully reclined.

(2) Hold the No. 1 fold seat switch assembly or No. 2 fold seat switch assembly in the stowage position until the seatback and seat cushion are completely stowed.

2. INITIAL POSITION MEMORY RESET

NOTICE:
When the following actions are performed, initial position memory reset is necessary:

* The battery is disconnected while the seatback or seat cushion is moving.
* The fold seat control ECU is replaced with another used fold seat control ECU.
* The seatback or seat cushion is moved while the fold seat control ECU is disconnected.
* The relationship of the positions of the seatback and seat cushion becomes abnormal due to removal/installation, replacement, etc. of the seat.

(a) Initial Position Memory Reset

(1) Press and hold the No. 1 fold seat switch assembly in the return position.

(2) Within 10 seconds of pressing the No. 1 fold seat switch assembly, press the rear power seat switch 5 times in the direction which moves the seatback forwards.

HINT
* When the initial position memory reset is completed, a buzzer will sound 3 times.
* When the engine switch is turned to on (IG) after initial position memory reset is completed, a buzzer sounds continuously while the engine switch is on (IG).