Installation

SEAT: POWER SEAT SWITCH (for Front Passenger Side): INSTALLATION

CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.

1. INSTALL FRONT POWER SEAT SWITCH RH

(a) Connect the power seat switch connector.

(b) Install the power seat switch with the 3 screws.

2. INSTALL FRONT SEAT CUSHION SHIELD RH

(a) Attach the 3 wire harness clamps and connect the seat wire connector.

(b) Attach the 3 claws to close the wire harness cover.

(c) Connect the lifter motor connector.

(d) Remove the clip attached to the seat cushion spring and install it to the cushion shield.





(e) Attach the 2 clips, 3 claws and guide.

(f) Attach the guide of the front seat No. 1 inner cushion shield and install the screw.

3. INSTALL RECLINING POWER SEAT SWITCH KNOB





(a) Attach the 2 claws to install the knob.

4. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB





(a) Attach the 2 claws to install the knob.

5. INSTALL FRONT SEAT ASSEMBLY

(a) Install the front seat assembly Installation.