Power Seat Switch (for Rear No. 2 Seat)

SEAT: POWER SEAT SWITCH (for Rear No. 2 Seat): INSPECTION

1. INSPECT REAR POWER SEAT SWITCH (for LH Side)

(a) Measure the resistance according to the value(s) in the table below.





Standard Resistance:





If the result is not as specified, replace the rear power seat switch assembly.

Text in Illustration





(b) Apply battery voltage to the switch connector and check that the power seat switch illuminates.





OK:





If the result is not as specified, replace the rear power seat switch assembly.

Text in Illustration





2. INSPECT REAR POWER SEAT SWITCH (for RH Side)

(a) Measure the resistance according to the value(s) in the table below.





Standard Resistance:





If the result is not as specified, replace the rear power seat switch assembly.

Text in Illustration





(b) Apply battery voltage to the switch connector and check that the power seat switch illuminates.





OK:





If the result is not as specified, replace the rear power seat switch assembly.

Text in Illustration





3. INSPECT NO. 1 FOLD SEAT SWITCH ASSEMBLY

(a) Measure the resistance according to the value(s) in the table below.





Standard Resistance:





If the result is not as specified, replace the No. 1 fold seat switch assembly.

Text in Illustration





(b) Apply battery voltage to the switch connector and check that the fold seat switch illuminates.





OK:





If the result is not as specified, replace the No. 1 fold seat switch assembly.

Text in Illustration