Reassembly

LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: REASSEMBLY

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.

1. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH

(a) Turn the cover in the direction indicated by the arrow to install it.





(b) Attach the 4 clamps to connect the wire.

2. INSTALL REAR SIDE MARKER LIGHT BULB

(a) Install the bulb.





(b) Turn the socket in the direction indicated by the arrow to install it.

3. INSTALL REAR TURN SIGNAL LIGHT BULB

(a) Install the bulb.





(b) Turn the socket in the direction indicated by the arrow to install it.