Customize Parameters

LIGHTING (EXT): LIGHTING SYSTEM: CUSTOMIZE PARAMETERS

1. CUSTOMIZE LIGHTING SYSTEM (EXT)

HINT
The following items can be customized.

NOTICE:
* When the customer requests a change in a function, first make sure that the function can be customized.
* Record the current settings before customizing.

(a) Customizing with the Techstream

(1) Connect the Techstream to the DLC3.

(2) Turn the engine switch on (IG).

(3) Turn the Techstream on.

(4) Enter the following menus: Utility / Customize Setting / Light Control.

(5) Select the setting by referring to the table below.





HINT
The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

*1





HINT
When the setting is closer to the "Light" side, the system dims the indicator lights even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before dimming the indicator lights.

*2





HINT
When the setting is closer to the "Dark" side, the system cancels the dimming of the indicator lights even when the surrounding area is relatively dark. When the setting is closer to the "Light" side, the system waits until the surrounding area is brighter before canceling the dimming of the indicator lights.

*3





HINT
When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.

(b) Customizing with Multi-display

(1) Turn the engine switch on (IG).

(2) Select the following menus: Setup / Vehicle / Vehicle Customization.

(3) Select the setting by referring to the table below.





HINT
The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

*1





HINT
When the setting is closer to the "Light" side, the system dims the indicator lights even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before dimming the indicator lights.

*2





HINT
When the setting is closer to the "Dark" side, the system cancels the dimming of the indicator lights even when the surrounding area is relatively dark. When the setting is closer to the "Light" side, the system waits until the surrounding area is brighter before canceling the dimming of the indicator lights.

*3





HINT
When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.

(c) Customizing with Multi-information display

(1) Turn the engine switch on (IG).

(2) With the vehicle stationary or at a vehicle speed of less than 8 km/h (4.9 mph), press and hold the menu switch on the steering pad switch to display the meter customize mode screen.

(3) Select the setting by referring to the table below.





HINT
The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

*





HINT
When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.