Installation

A760F AUTOMATIC TRANSMISSION / TRANSAXLE: PARK / NEUTRAL POSITION SWITCH: INSTALLATION

1. INSTALL PARK/NEUTRAL POSITION SWITCH ASSEMBLY

(a) Install the switch to the manual valve shaft.

(b) Temporarily install the bolt.

(c) Install a new lock washer and the nut.

Torque : 6.9 Nm (70 kgf-cm, 61 in-lbf)





Text in Illustration





(d) Turn the control shaft lever LH clockwise until it stops, and then turn it counterclockwise 2 notches to set it to the N position.





(e) Align the groove with the neutral basic line.





Text in Illustration





(f) Hold the switch in position and tighten the bolt.

Torque : 13 Nm (130 kgf-cm, 9 ft-lbf)

(g) Using a screwdriver, bend the tabs of the lock washer.

(h) Connect the switch connector.

2. INSPECT SHIFT LEVER POSITION Adjustments

3. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY Component Tests and General Diagnostics