Installation

1UR-FE ENGINE CONTROL: IGNITION COIL AND SPARK PLUG: INSTALLATION

1. INSTALL SPARK PLUG

(a) Using a 16 mm plug wrench, install the 8 spark plugs.

Torque : 21 Nm (214 kgf-cm, 15 ft-lbf)

2. INSTALL IGNITION COIL ASSEMBLY

(a) for Bank 1:

Install the 4 ignition coils.

(1) Install the 4 ignition coils with the 4 bolts.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(2) Connect the 4 ignition coil connectors.

(3) Attach the clamp and connect the engine wire.

(b) for Bank 2:

Install the 4 ignition coils.

(1) Install the 4 ignition coils with the 4 bolts.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(2) Connect the 4 ignition coil connectors.

(3) Attach the 2 clamps and connect the engine wire.

(4) Connect the No. 4 water by-pass pipe with the 2 bolts.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(5) Attach the clamp and connect the engine wire.

3. INSTALL AIR CLEANER CASE SUB-ASSEMBLY Installation

4. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

5. INSTALL AIR CLEANER CAP AND HOSE Installation

6. INSTALL V-BANK COVER SUB-ASSEMBLY Installation