Installation

SUSPENSION CONTROL: STABILIZER CONTROL ECU: INSTALLATION

1. INSTALL STABILIZER CONTROL ECU

(a) Install the stabilizer control ECU with the bolt.

Torque : 14 Nm (138 kgf-cm, 10 ft-lbf)

NOTICE:
* Replace the stabilizer control ECU with a new one if it is dropped.
* Make sure the bracket rotation stopper touches the installation position.

(b) Connect the connector.

NOTICE:
Securely connect the connector.

2. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

(a) Install the lower No. 1 instrument panel airbag assembly Installation.

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.