Installation

SUSPENSION CONTROL: SUSPENSION CONTROL ECU: INSTALLATION

1. INSTALL SUSPENSION CONTROL ECU

(a) Install the suspension control ECU with the 2 bolts.

Torque : 8.5 Nm (87 kgf-cm, 75 in-lbf)

NOTICE:
* Replace the suspension control ECU with a new one if it is dropped.
* Make sure the bracket rotation stopper touches the installation position.

(b) Connect the 3 connectors.

NOTICE:
Securely connect the connectors.

2. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

(a) Install the lower No. 1 instrument panel airbag assembly Installation.

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. PERFORM REGISTRATION

(a) Perform registration Programming and Relearning.