Installation

PARKING BRAKE: PARKING BRAKE SWITCH: INSTALLATION

1. INSTALL PARKING BRAKE SWITCH ASSEMBLY

(a) Install the parking brake switch assembly to the parking brake control pedal assembly with the screw.

Torque : 3.2 Nm (33 kgf-cm, 28 in-lbf)

2. INSTALL PARKING BRAKE CONTROL PEDAL ASSEMBLY

(a) Temporarily install the parking brake control pedal assembly with the 3 nuts.

(b) Tighten the 3 nuts.

Torque : 13 Nm (127 kgf-cm, 9 ft-lbf)

(c) Connect the parking brake switch connector.

(d) Install the No. 1 parking brake cable assembly to the body with the 2 nuts.

Torque : 6.0 Nm (61 kgf-cm, 53 in-lbf)

3. INSTALL TIRE PRESSURE WARNING ECU Installation

4. INSTALL TURN SIGNAL FLASHER ASSEMBLY Installation

5. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

(a) Install the lower No. 1 instrument panel airbag assembly Installation.

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.