Removal

SUPPLEMENTAL RESTRAINT SYSTEMS: SIDE AIRBAG SENSOR: REMOVAL

HINT
* Use the same procedure for the RH side and LH side.
* The procedure listed below is for the LH side.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
* w/ Navigation System:
After the engine switch is turned off, the display and navigation module display (navigation system) records various types of memory and settings. As a result, after turning the engine switch off, be sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) battery terminal.

Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal





* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH Disassembly

3. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG LH Disassembly

4. REMOVE FRONT ARMREST ASSEMBLY LH Disassembly

5. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY Disassembly

6. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH Disassembly

7. REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP LH Disassembly

8. REMOVE SIDE AIRBAG SENSOR ASSEMBLY LH

(a) Disconnect the connector.





(b) Remove the bolt and side airbag sensor.