Ride Height Sensor: Testing and Inspection

SUSPENSION CONTROL: HEIGHT CONTROL SENSOR: INSPECTION

1. INSPECT REAR HEIGHT CONTROL SENSOR

(a) Check the rear height control sensor.





Text in Illustration





(1) Connect 3 dry cell batteries of 1.5 V in series.

(2) Connect the positive (+) end of the batteries to terminal 1 (SHB) of the height control sensor and the negative (-) end of the batteries to terminal 3 (SHG). While slowly moving the sensor link up and down, measure the voltage according to the value(s) in the table below.

Standard Voltage:

for RH





for LH





NOTICE:
Do not apply higher than 6 V.

If the result is not as specified, replace the height control sensor.