Washer Fluid Level Switch: Testing and Inspection

WIPER / WASHER: WASHER LEVEL WARNING SWITCH: INSPECTION

1. INSPECT LEVEL WARNING SWITCH ASSEMBLY

HINT
The following check should be performed with the windshield washer motor and pump installed to the washer jar.

(a) Fill the washer jar with washer fluid.

(b) Measure the resistance according to the value(s) in the table below.





Standard Resistance:





HINT
When the fluid volume is between 630 and 830 cc (38.4 and 50.6 cu.in.), the level warning switch may be on or off.

Text in Illustration





If the result is not as specified, replace the level warning switch assembly.