How To Proceed With Troubleshooting
SUSPENSION CONTROL: KINETIC DYNAMIC SUSPENSION SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING
HINT
*: Use the Techstream.
1. VEHICLE BROUGHT TO WORKSHOP
NEXT -- Continue to next step.
2. CUSTOMER PROBLEM ANALYSIS
NEXT -- Continue to next step.
3. INSPECT BATTERY VOLTAGE
Standard voltage:
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding.
NEXT -- Continue to next step.
4. INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
(a) Using the Techstream, inspect the CAN communication function to make sure there are no malfunctions in the communication system Diagnosis System.
Result
B -- GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING)
A -- Continue to next step.
5. CHECK AND CLEAR DTC*
(a) Check for DTCs Kinetic Dynamic Suspension System.
NEXT -- Continue to next step.
6. PROBLEM SYMPTOM CONFIRMATION
Result
B -- Go to step 9
NEXT -- Continue to next step.
7. SYMPTOM SIMULATION
NEXT -- Continue to next step.
8. CHECK DTC*
(a) Check for DTCs Kinetic Dynamic Suspension System.
Result
B -- Go to step 10
A -- Continue to next step.
9. PROBLEM SYMPTOMS TABLE
(a) Refer to the Problem Symptoms Table Kinetic Dynamic Suspension System.
NEXT -- Go to step 12
10. DTC CHART
(a) Refer to the Diagnostic Trouble Code Chart Kinetic Dynamic Suspension System.
NEXT -- Continue to next step.
11. CIRCUIT INSPECTION
NEXT -- Continue to next step.
12. IDENTIFICATION OF PROBLEM
NEXT -- Continue to next step.
13. REPAIR OR REPLACE
NEXT -- Continue to next step.
14. CONFIRMATION TEST
NEXT -- END