Installation

MIRROR (INT): INNER REAR VIEW MIRROR: INSTALLATION

1. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/o Automatic High Beam System)

(a) w/o Rear View Monitor System:

(1) Using "TORX" socket wrench (T20), install the inner rear view mirror with the screw.





Torque : 3.5 Nm (35 kgf-cm, 31 in-lbf)

(2) Connect the connector.

(b) w/ Rear View Monitor System:

(1) Using "TORX" socket wrench (T20), install the inner rear view mirror with the screw.





Torque : 3.5 Nm (35 kgf-cm, 31 in-lbf)

(2) Connect the connector.

2. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/ Automatic High Beam System)

NOTICE:
* Do not touch the camera lens (built into the inner rear view mirror assembly) with a bare hand.
* Do not allow anything to adhere to the camera lens (built into the inner rear view mirror assembly).
* Do not apply strong impacts to the inner rear view mirror assembly.
* Do not allow any liquid to get on the inner rear view mirror assembly.

(a) Using "TORX" socket wrench (T20), install the inner rear view mirror with the screw.





Torque : 3.5 Nm (35 kgf-cm, 31 in-lbf)

(b) Connect the connector.

3. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/o Automatic High Beam System)

(a) w/o Rear View Monitor System:

(1) Engage the 6 claws and install the inner rear view mirror stay holder cover.





(2) Engage the 2 claws and install the inner rear view mirror stay holder cover as shown in the illustration.





(b) w/ Rear View Monitor System:

(1) Engage the 2 claws and install the inner rear view mirror stay holder cover.





(2) Engage the 2 claws and install the inner rear view mirror stay holder cover as shown in the illustration.





4. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ Automatic High Beam System)

(a) Engage the 2 claws and install the inner rear view mirror stay holder cover.





(b) Engage the 2 claws and install the inner rear view mirror stay holder cover as shown in the illustration.