Removal

MIRROR (INT): INNER REAR VIEW MIRROR: REMOVAL

1. REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER (w/o Automatic High Beam System)

(a) w/o Rear View Monitor System:

(1) Disengage the 2 claws and slide the inner rear view mirror stay holder cover as shown in the illustration.





(2) Disengage the 6 claws and remove the inner rear view mirror stay holder cover.





(b) w/ Rear View Monitor System:

(1) Disengage the 2 claws and slide the inner rear view mirror stay holder cover as shown in the illustration.





(2) Disengage the 2 claws and remove the inner rear view mirror stay holder cover.





2. REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ Automatic High Beam System)

(a) Disengage the 2 claws and slide the inner rear view mirror stay holder cover as shown in the illustration.





(b) Disengage the 2 claws and remove the inner rear view mirror stay holder cover.





3. REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/o Automatic High Beam System)

(a) w/o Rear View Monitor System:

(1) Disconnect the connector.





(2) Using "TORX" socket wrench (T20), remove the screw and inner rear view mirror assembly.

(b) w/ Rear View Monitor System:

(1) Disconnect the connector.





(2) Using "TORX" socket wrench (T20), remove the screw and inner rear view mirror assembly.

4. REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/ Automatic High Beam System)

NOTICE:
* Do not touch of the camera lens (built into the inner rear view mirror assembly) with a bare hand.
* Do not allow anything to adhere to the camera lens (built into the inner rear view mirror assembly).
* Do not apply strong impact to the inner rear view mirror assembly.
* Do not allow any liquids to get on the inner rear view mirror assembly.

(a) Disconnect the connector.





(b) Using "TORX" socket wrench (T20), remove the screw and inner rear view mirror assembly.