Installation

SEAT: FRONT SEAT ASSEMBLY: INSTALLATION

1. INSTALL FRONT SEAT ASSEMBLY

(a) Place the front seat assembly in the cabin.

NOTICE:
Be careful not to damage the vehicle body.

(b) Connect the connectors under the seat.

(c) Connect the cable to the negative (-) battery terminal.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

(d) Temporarily install the front seat assembly with the 4 bolts.

(e) Operate the power seat switch knob and move the seat to the rearmost position.

(f) Tighten the 2 bolts on the front side of the seat.





Torque : 37 Nm (374 kgf-cm, 27 ft-lbf)

HINT
Tighten the bolts in the order indicated in the illustration.

(g) Operate the power seat switch knob and move the seat to the foremost position.

(h) Tighten the 2 bolts on the rear side of the seat.





Torque : 37 Nm (374 kgf-cm, 27 ft-lbf)

HINT
Tighten the bolts in the order indicated in the illustration.

2. INSTALL REAR INNER SEAT TRACK BRACKET COVER

(a) Engage the 4 claws and install the rear inner seat track bracket cover as shown in the illustration.





3. INSTALL REAR OUTER SEAT TRACK BRACKET COVER

(a) Engage the 4 claws to install the rear outer seat track bracket cover as shown in the illustration.





4. INSTALL FRONT INNER SEAT TRACK BRACKET COVER

(a) Operate the power seat switch knob and move the seat to the rearmost position.

(b) Engage the 2 guides and 2 claws to install the front inner seat track bracket cover as shown in the illustration.





5. INSTALL FRONT OUTER SEAT TRACK BRACKET COVER

(a) Engage the 2 guides and 2 claws to install the front outer seat track bracket cover as shown in the illustration.





6. INSTALL FRONT SEAT HEADREST ASSEMBLY

(a) Install the front seat headrest assembly as shown in the illustration.





7. INSPECT FRONT SEAT ASSEMBLY

(a) Check the power seat operation.

(b) Check the seat heater operation.

w/o Climate Control Seat System:

(1) Turn the Turn the power switch on (IG).

(2) Turn the seat heater switch on.

(3) Wait 5 minutes or more and confirm that the seat surface becomes warm.

8. INSPECT SRS WARNING LIGHT

Diagnosis System

9. INSTALL REAR DECK FLOOR BOX Installation