Courtesy Switch

DOOR / HATCH: FUEL LID COURTESY SWITCH: INSTALLATION

1. INSTALL FUEL LID COURTESY SWITCH ASSEMBLY

(a) Engage the clamp and temporarily install the fuel lid courtesy switch assembly.





(b) Connect the connector.

(c) Install the fuel lid courtesy switch assembly with the nut from outside the vehicle.





Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

2. INSTALL REAR NO. 3 SPEAKER ASSEMBLY (for 12 or 15 Speakers) Installation

3. INSTALL REAR NO. 1 SPEAKER BRACKET (for 12 or 15 Speakers) Installation

4. INSTALL NO. 1 DECK BOARD REINFORCEMENT (for 12 or 15 Speakers) Installation

5. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH Installation

6. INSTALL RECLINING REMOTE CONTROL BEZEL LH Installation

7. INSTALL ROPE HOOK ASSEMBLY Installation

8. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK Installation

9. INSTALL REAR SEAT SIDE COVER LH Installation

10. INSTALL REAR FLOOR FINISH SIDE PLATE LH Installation

11. INSTALL REAR FLOOR FINISH PLATE Installation

12. INSTALL REAR DOOR SCUFF PLATE LH Installation

13. INSTALL REAR SEAT ASSEMBLY LH

HINT
Refer to the procedure from Install Rear Seat Assembly LH Installation.

14. INSTALL FRONT DECK FLOOR BOX Installation

15. INSTALL DECK SIDE TRIM BOX LH (for Compact Spare Tire) Installation

16. INSTALL DECK SIDE TRIM BOX LH (for Full Size Spare Tire) Installation

17. INSTALL REAR DECK FLOOR BOX Installation

18. INSTALL TONNEAU COVER ASSEMBLY Installation

19. INSTALL NO. 4 REAR FLOOR BOARD (for Compact Spare Tire) Installation

20. INSTALL NO. 4 REAR FLOOR BOARD (for Full Size Spare Tire) Installation

21. INSTALL DECK BOARD SUB-ASSEMBLY Installation