Opener Switch

DOOR / HATCH: FUEL LID OPENER SWITCH: INSTALLATION

1. INSTALL FUEL LID OPENER SWITCH

(a) Engage the 2 claws and install the fuel lid opener switch as shown in the illustration.





2. INSTALL NO. 1 SWITCH HOLE BASE Installation

3. INSTALL INSTRUMENT PANEL GARNISH LH Installation

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Air Suspension)

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

5. INSTALL REAR DECK FLOOR BOX (w/ Air Suspension) Installation

6. INSPECT SUSPENSION CONTROL SYSTEM (w/ Air Suspension)

Test Mode Procedure