Installation

DOOR / HATCH: POWER BACK DOOR MAIN SWITCH: INSTALLATION

1. INSTALL POWER BACK DOOR MAIN SWITCH

(a) Engage the 2 claws to install the power back door main switch as shown in the illustration.





2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

3. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Installation

4. INSTALL INSTRUMENT PANEL GARNISH RH Installation

5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

6. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH Installation

7. INSTALL FRONT DOOR SCUFF PLATE RH Installation

8. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL Installation

9. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation

10. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

12. INSTALL REAR DECK FLOOR BOX Installation

13. INSPECT SRS WARNING LIGHT

Diagnosis System