Door Unlock Detection Switch Circuit
LIGHTING (INT): LIGHTING SYSTEM: Door Unlock Detection Switch Circuit
- Door Unlock Detection Switch Circuit
DESCRIPTION
The main body ECU (multiplex network body ECU) detects the condition of the door unlock detection switch.
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
1. READ VALUE USING TECHSTREAM
(a) Connect the Techstream to the DLC3.
(b) Turn the power switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Main Body / Data List.
(e) Read the display on the Techstream.
Main Body
Result:
B -- INSPECT FRONT DOOR LOCK ASSEMBLY LH
C -- INSPECT FRONT DOOR LOCK ASSEMBLY RH
D -- INSPECT REAR DOOR LOCK ASSEMBLY LH
E -- INSPECT REAR DOOR LOCK ASSEMBLY RH
A -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Interior Lighting System
2. INSPECT FRONT DOOR LOCK ASSEMBLY LH
(a) Remove the front door lock assembly LH Components.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPLACE FRONT DOOR LOCK ASSEMBLY LH Components
OK -- Continue to next step.
3. CHECK HARNESS AND CONNECTOR (FRONT DOOR LOCK ASSEMBLY LH - MAIN BODY ECU AND BODY GROUND)
(a) Disconnect the J8 front door lock assembly LH connector.
(b) Disconnect the F13 main body ECU (multiplex network body ECU) connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) Components
4. INSPECT FRONT DOOR LOCK ASSEMBLY RH
(a) Remove the front door lock assembly RH Components.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPLACE FRONT DOOR LOCK ASSEMBLY RH Components
OK -- Continue to next step.
5. CHECK HARNESS AND CONNECTOR (FRONT DOOR LOCK ASSEMBLY RH - MAIN BODY ECU AND BODY GROUND)
(a) Disconnect the I8 front door lock assembly RH connector.
(b) Disconnect the F13 main body ECU (multiplex network body ECU) connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) Components
6. INSPECT REAR DOOR LOCK ASSEMBLY LH
(a) Remove the rear door lock assembly LH Components.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPLACE REAR DOOR LOCK ASSEMBLY LH Components
OK -- Continue to next step.
7. CHECK HARNESS AND CONNECTOR (REAR DOOR LOCK ASSEMBLY LH - MAIN BODY ECU AND BODY GROUND)
(a) Disconnect the L6 rear door lock assembly LH connector.
(b) Disconnect the 2H instrument panel junction block assembly connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
8. INSPECT INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY
(a) Remove the instrument panel junction block assembly.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPLACE INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY
OK -- REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) Components
9. INSPECT REAR DOOR LOCK ASSEMBLY RH
(a) Remove the rear door lock assembly RH Components.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPLACE REAR DOOR LOCK ASSEMBLY RH Components
OK -- Continue to next step.
10. CHECK HARNESS AND CONNECTOR (REAR DOOR LOCK ASSEMBLY RH - MAIN BODY ECU AND BODY GROUND)
(a) Disconnect the K6 rear door lock assembly RH connector.
(b) Disconnect the F14 main body ECU (multiplex network body ECU) connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) Components