Removal

LIGHTING (EXT): HEIGHT CONTROL SENSOR: REMOVAL

1. PRECAUTION

(a) w/ Air Suspension:

NOTICE:
Be sure to read Precaution thoroughly before servicing Service Precautions.

(b) w/ Navigation System for HDD:

NOTICE:
After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the power switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

2. REMOVE REAR DECK FLOOR BOX Removal

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. REMOVE REAR WHEEL

5. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY

(a) Disconnect the connector.





(b) Remove the bolt and disengage the guide.

(c) Remove the bolt and disengage the guide.





(d) Remove the 2 nuts and rear height control sensor sub-assembly.

NOTICE:
Do not drop the rear height control sensor sub-assembly. If it is dropped, replace it with a new one.