Transmission Position Sensor/Switch: Adjustments

P313 HYBRID TRANSMISSION / TRANSAXLE: SHIFT LEVER POSITION SENSOR: ADJUSTMENT

1. INSPECT SHIFT LEVER POSITION SENSOR POSITION

(a) Apply the parking brake.

(b) Lock the wheels with chocks to secure the vehicle.

(c) Turn the power switch on (READY).

(d) Move the shift lever to D and release the brake.

NOTICE:
Be sure to apply the parking brake and lock the wheels with chocks to secure the vehicle.

(e) Slowly move the shift lever to N and measure moving distance (A) of the shift lever from the original point to the gear activation point.

NOTICE:
Be sure to move the shift lever slowly.

(f) Move the shift lever to R and release the brake.

NOTICE:
Be sure to apply the parking brake and lock the wheels with chocks to secure the vehicle.

(g) Slowly move the shift lever to N and measure moving distance (B) of the shift lever from the original point to the vehicle activation point.

NOTICE:
Be sure to move the shift lever slowly.

(h) Check that moving distances (A) and (B) shown in the illustration are almost the same.





Text in Illustration





HINT
* If moving distances (A) and (B) are almost the same, adjustment of the shift lever position is not necessary.
* If moving distance (A) is shorter than (B), perform adjustment of the shift lever position*1.
* If moving distance (B) is shorter than (A), perform adjustment of the shift lever position*2.

2. ADJUST SHIFT LEVER POSITION SENSOR POSITION

(a) If moving distance (A) is shorter than (B)*1:





Text in Illustration





HINT
If the shift lever is moved from R to N, the moving distance of the shift lever from the original point to the gear activation point becomes longer.

(1) Move the shift lever to N.

(2) Loosen the 2 bolts.





(3) Slightly turn the shift lever position sensor counterclockwise.





(4) Tighten the 2 bolts in the order shown in the illustration.





Torque : 13 Nm (133 kgf-cm, 10 ft-lbf)

(5) Recheck the shift lever position.

(b) If moving distance (B) is shorter than (A)*2:





Text in Illustration





HINT
If the shift lever is moved from D to N, the moving distance of the shift lever from the original point to the gear activation point becomes longer.

(1) Move the shift lever to N.

(2) Loosen the 2 bolts.





(3) Slightly turn the shift lever position sensor clockwise.





(4) Tighten the 2 bolts in the order shown in the illustration.





Torque : 13 Nm (133 kgf-cm, 10 ft-lbf)

(5) Recheck the shift lever position.