Removal

LIGHTING (EXT): HEADLIGHT ASSEMBLY (for LED Headlight): REMOVAL

1. PRECAUTION (w/ Navigation System for HDD)

NOTICE:
After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the power switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

2. REMOVE REAR DECK FLOOR BOX Removal

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. REMOVE ENGINE ROOM SIDE COVER Removal

5. REMOVE ENGINE ROOM SIDE COVER LH Removal

6. REMOVE COOL AIR INTAKE DUCT SEAL Removal

7. REMOVE HOOD CENTER CUSHION Removal

8. REMOVE FRONT BUMPER ASSEMBLY Removal

9. REMOVE HEADLIGHT ASSEMBLY

(a) Remove the 3 bolts and screw.





(b) Disengage the clamp.

(c) Disconnect each connector and remove the headlight assembly.