Installation

Manifold Pressure/Vacuum Sensor

1. INSTALL MANIFOLD ABSOLUTE PRESSURE SENSOR

(a) Install the manifold absolute pressure sensor with the 2 bolts.





Torque : 9.0 Nm (92 kgf-cm, 80 in-lbf)

(b) Connect the connector.

2. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY Installation

3. INSTALL FRONT SHOCK ABSORBER CAP LH (w/ Air Suspension) Installation

4. INSTALL FRONT SHOCK ABSORBER CAP RH (w/ Air Suspension)

HINT
Use the same procedure for the LH side and RH side.

5. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

(a) Install the windshield wiper motor and link assembly Installation.