Installation

P313 HYBRID TRANSMISSION / TRANSAXLE: OIL PUMP: INSTALLATION

1. INSTALL OIL WITH MOTOR PUMP ASSEMBLY

(a) Install the oil with motor pump assembly with the 2 nuts.





Torque : 7.0 Nm (71 kgf-cm, 62 in-lbf)

(b) Connect the 2 oil cooler hoses.

(c) Connect the oil pump connector.

2. INSTALL FRONT BUMPER ASSEMBLY Installation

3. INSTALL HOOD CENTER CUSHION Installation

4. INSTALL COOL AIR INTAKE DUCT SEAL Installation

5. INSTALL ENGINE ROOM SIDE COVER Installation

6. INSTALL ENGINE ROOM SIDE COVER LH Installation

7. ADD HYBRID TRANSAXLE FLUID Procedures

8. INSPECT AND ADJUST HYBRID TRANSAXLE FLUID Procedures

9. ADD WASHER FLUID (w/ Headlight Cleaner System) Installation

10. PREPARE VEHICLE FOR FOG LIGHT AIM ADJUSTMENT Adjustments

11. PREPARE FOR FOG LIGHT AIMING Adjustments

12. INSPECT FOG LIGHT AIMING Adjustments

13. ADJUST FOG LIGHT AIMING Adjustments