Canada - Navigation System - HDD Map Update Process

L-TCI-3268

February 26, 2013

PREMIUM HDD NAVIGATION MAP UPDATE PROCESS (EMV-N)

Service Category
Audio/Visual/Telematics

Section
Navigation/Multi Info Display

Market
Canada





APPLICABILITY:

INTRODUCTION:

Lexus models equipped with the Premium HDD Navigation (AVN/AW-EMV) System require a Special Service Tool (SST) USB drive to update the map, points of interest, Gracenote(R) and system software. The SST is used with all vehicles to deliver the update, however a unique Activation Number is required for each vehicle. Activation Numbers are provided in an Activation Card Number (ACN) pamphlet available through the normal parts ordering system. Use the process described in this bulletin to perform the update.

NOTE

^ Gracenote(R) information must be updated at the same time as Map Data. This data is included on the Map Data SST.

^ Map data will be released annually through the shipment of a USB Drive SST to each dealer. The SST must be stored in the SST cabinet to ensure it can be easily found.





PARTS INFORMATION:





WARRANTY INFORMATION:





REQUIRED TOOLS & EQUIPMENT:

ON-VEHICLE DATA NAVIGATION UPDATE:

1. Update Gracenote(R) information using L-TCI-3269.

HINT

Connect the GR8 Battery Diagnostic Station in Power Supply Mode to the vehicle prior to beginning the process to ensure constant battery voltage.





2. Log into Infostream.





A. Navigate to the Service page.





B. On the Service page scroll to Reference under the ETAS module (0095), Launch ETAS.





3. On the tools page (ETAS -> TOOLS -> tools and equipment), Open the document titled "1.0 ~ NAVIGATION UPDATE WIZARD ~ ACTIVATION CARD TYPE".





A. Click the link "TCI-TIS Navigation Update Wizard".





B. Enter your infostream User name and Password. Click "OK".





4. Copy the token number that is generated and then click the Navigation Map Update button.





5. On the Navigation tab enter the token number that was copied and click Submit.





6. Select Denso from the Select Navigation Manufacturer dropdown.





7. Enter the Activation Card number from the inside of the pamphlet (obtained from parts department).

8. Click Submit.

9. Turn Ignition ON (Ready OFF).

10. Please note the head unit style to determine how to get to the Map Data screen.





A. Press "Menu" on the Remote Touch pad. Then select "INFO".





11. Press the "Map Data" button on the navigation screen.





12. Record the Map Version and Map Update ID from the navigation screen.





13. Enter navigation data into the Navigation Update Wizard form.

A. Select the correct USB part number from the drop down menu (found on the SST packaging; Starts with "LEXD").

B. Input the Map Update ID into TIS.

C. Input the Map Version into TIS.

D. Enter the VIN.

E. Enter the Repair Order Number.

F. Click on the Submit button.





14. Check off each item after confirming that it is correct. If any of the information is incorrect, click the "Back" button.

15. Click the Confirm button.





16. Note the License Key that was generated. (Print this page if necessary).

17. Insert the "USB Drive - Navigation Update" stick into the USB port of the vehicle (usually located under the navigation head unit, in the center console/armrest, or glove box).





18. Click the "Update Map" button on navigation screen.





19. Click the "Yes" button on the navigation screen.





20. Enter the License Key from step 17.

21. Click on the "OK" button on the navigation screen.








22. Update Navigation Head Unit Software. Click "Yes" on the "Software Update" screen to accept and begin this update.

If the head unit displays the "Map Update" screen, go to step 20.

NOTE

Navigation Map Data will be loaded when this process completes.





A. Cycle ignition OFF, then ON (Ready OFF).





B. Allow update to complete (approximately 10 minutes).

C. The head unit will prompt to cycle ignition. Cycle ignition "OFF" and then ON (Ready OFF).





D. Press "Menu" on the Remote Touch pad. Then select "INFO".

E. Press the "Map Data" button.





23. The Navigation Map Update will begin automatically.





24. The new map data will be available after you cycle the ignition. Turn the ignition OFF then ON (Ready OFF).





25. Map Update is complete.

26. Verify navigation operation.

NOTE:
Issue of the Technical Service Bulletin is to ensure that proper repair information is available. IT DOES NOT CONSTITUTE AN AUTHORIZATION FOR REPAIR. Normal provisions of the formal warranty policy, as applicable, will apply.

© 2012 Lexus, a division of Toyota Motor Sales, Canada