CA/50 State Certified Emission Control Label Ordering
PRODUCT GENERAL INFORMATIONPG001-00
April 7, 2000
Title:
CA/50 STATE CERTIFIED EMISSION
CONTROL UNDERHOOD LABEL ORDERING
Model:
All Models
Introduction
It is no longer necessary to fax the CA/SO State Emission Control Label Order Form to TMS. California (CA) and 50 State Certified underhood emission control labels (emission labels) may now be obtained through your dealership Parts Department utilizing standard replacement parts ordering procedures via the TDN. Follow the guidelines outlined in this TSB to ensure proper label application.
Applicable Vehicles
^ All model year LEXUS Vehicles.
We have included a table showing 1995 - 2000 U.S. model numbers and their exhaust emissions certifications. Please continue to consult the Electronic Parts Catalog (EPC) or the parts microfiche for emission label parts numbers.
NOTE:
Although the California Smog Impact Fee has been discontinued, dealers are still required by regulation to verify the correct emission label is installed on the correct vehicle.
REGULATIONS:
The United States Clean Air Act, Title II, Sections 202, 203, 205, and 207 mandates that the emission control label must correctly match the emissions equipment on the vehicle. Any person violating this requirement is subject to applicable State penalties and a Federal civil penalty of no more than $25,000 for each instance.
Personnel at franchised dealerships are authorized to affix such labels to vehicles and are, therefore, subject to this regulation and the attendant penalties.
^ Do not sell the labels over the counter. Always install the label on the vehicle.
^ Never install a California and/or 50 State Label on a vehicle that is not a California/SO State Emission Certified Vehicle.
^ Do not Install Federal Emission labels on vehicles that are not Federal Emissions Certified.
Warranty Information
Label Ordering Procedure
To ensure that the emission control labels are affixed to the correct vehicle, it is necessary to follow these procedures:
1. Record the Vehicle Identification Number (VIN) from the vehicle requiring a replacement label.
2. Refer to the Vehicle Detail screen in the LEXUS Service Inquiry system to determine the correct 4-digit U.S. model number for the VIN in question.
3. Determine the vehicle's emission certification using the U.S. model number and the attached tables.
4. Once the emissions equipment information is verified, obtain the part number information by consulting the EPC/microfiche.
5. Order the label through your Parts Department, using normal parts ordering procedures via the TDN.
6. When the part arrives, verify that the emission label matches the emissions equipment on the vehicle. This will ensure the correct label is affixed to the vehicle.
1995 MY
Emission Control Labels
1996 MY
Emission Control Labels
1997 MY
Emission Control Labels
1998 MY
Emission Control Labels
1999 MY
Emission Control Labels
2000 MY
Emission Control Labels