Owner Instruction

OWNER INSTRUCTION
(FOR PERSONALIZED SEAT BELT EXTENDERS)

Precaution when using the seat belt extenders:

1. Never use the seat belt extender if you can fasten the seat belt without it.

2. Remember that the extender provided for you may not be safe when used on a different vehicle, or for another person and at different seating position than specified.

3. When the seat belt extender is provided for rear seatposition (with automatic locking retractor) make sure the retractor is locked when in use.

4. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN LESS EFFECTIVENESS OF THE SEAT BELT RESTRAINT SYSTEM IN CASE OF VEHICLE ACCIDENT, CAUSING PERSONAL INJURY.





Using the Seat Belt Extender

1. To connect the extender to the seat belt, insert the tab into the seat belt buckle so that the buckle-release buttons of the extender and the seat belt are located on the same side as shown. You will hear a click when the tab locks into the buckle.

2. MAKE SURE THAT THE CONNECTION IS SECURE AND THE SEAT BELT EXTENDER IS NOT TWISTED.

3. When releasing the seat belt, press on the buckle-release button on the extender, not on the seat belt. This helps prevent damage to the vehicle interior and extender itself.


4. When not in use, remove the extender and store in the vehicle for future use.


Owner's Manual Text:
SEAT BELT EXTENDER

If your seat belt cannot be fastened securely because it is not long enough, a personalized seat belt extender is available from your Lexus dealer free of charge.

Please contact your local Lexus dealer so that the dealer can order the proper required length for the extender. Bring the heaviest coat you expect to wear for proper measurement and selection of length. Additional ordering information is available at your Lexus dealer.

CAUTION:
When using the seat belt extender, observe the following. Failure to follow these instructions could result in a less effective seat belt restraint system during a vehicle accident, increasing the chance of personal injury.

^ Never use the seat belt extender if you can fasten the seat belt without it.

^ Remember that the extender provided for you may not be safe when used on a different vehicle, or for another person and at different seating positions than specified.





When connecting the extender to the seat belt, insert the tab into the seat belt buckle so that the "PRESS" signs on the buckle-release buttons of the extender and the seat belt are both facing outward as shown.


You will hear a click when the tab locks into the buckle. When releasing the seat belt, press on the buckle-release button on the extender, not on the seat belt. This helps prevent damage to the vehicle interior and extender itself.

When not in use, remove the extender and store in the vehicle for future use.