Fuel Pump: Service and Repair

Fuel Pump And Bracket Assembly:

Preparation
- Disconnect negative battery terminal.
- Drain fuel into an approved container.
- Remove front luggage compartment cover.
- Disconnect fuel pump electrical connector.
- Remove rear seat back.
- Remove access hole plug.

Fuel Pump Set Plate:

Fuel Pump Removal
- Remove fuel pump set plate.
- Pinch hose clamps and slide fuel hose toward pump.

Pump Bracket:

- Remove three pump bracket retaining screws.
- Lift fuel pump from tank.

Fuel Pump Disassembly:

Fuel Pump Disassembly
- Remove fuel pump wires.

Removing Pump From Bracket:

- Pull lower end of pump away from pump bracket.
- Remove rubber cushion.

Removing Pump Filter:

- Remove filter retaining clip and filter.
- Reverse procedure to install. Use a new tank gasket and note the following torque values:

Pump bracket - 48 in.lbs (5.4 Nm)
Pump set plate - 26 in.lbs (2.9 Nm)