Windshield Upper Molding - Wind Noise

BODY 020
MAY 3, 1991
LS400

Title WINDSHIELD UPPER MOLDING NOISE





To eliminate possible wind noise caused by lifting of the windshield upper molding while driving at high speeds, the shape of the windshield molding fastener has been changed. The thickness of the double sided adhesive tape at the rear of the fastener has been increased from 0.8 mm to 1.0 mm as shown in the illustrations below.


PRODUCTION EFFECTIVE:

From frame number: JT8UF11E * L0015821 (December, 1989)


PART NUMBER INFORMATION:

Previous Part Number New Part Number Part Name

75548-50031 75548-50032 Fastener, Windshield
Outside Molding





Note: The new part can be used with previous vehicles by modifying the new part as shown below.