Part 2

25. REMOVE A/C COMPRESSOR WITHOUT DISCONNECTING HOSES
(a) Disconnect the A/C compressor connector.
(b) Remove the drive belt.
(c) Remove the five bolts, compressor stay and disconnect the A/C compressor.

HHINT: Put aside the compressor, and suspend it to the radiator support with a string.






26. REMOVE FRONT EXHAUST PIPE
(a) Loosen the two bolts, and disconnect the bracket.
(b) Remove the two bolts and nuts holding the front exhaust pipe to the catalytic converter.
(c) Remove the four nuts holding the exhaust pipe to the exhaust manifolds.
(d) Disconnect the front exhaust pipe and gaskets.
27. REMOVE DRIVE SHAFTS






28. DISCONNECT PS ACV
(a) Disconnect the two PS air hoses.
(b) Remove the nut and disconnect the PS ACV.






29. DISCONNECT HYDRAULIC COOLING FAN PRESSURE HOSE
Using SST, disconnect the pressure hose. SST 09631-22020






30. REMOVE PS PUMP WITHOUT DISCONNECTING HOSES
(a) Remove the PS drive belt.
(b) Remove the two bolts, and disconnect the PS pump from the engine.

HINT: Put aside the pump and suspend it to the cowl with a string.






31. DISCONNECT LH ENGINE MOUNTING INSULATOR (M/T)
Remove the three bolts, and disconnect the mounting insulator.






(A/T)
Remove the four bolts, and disconnect the mounting insulator.






32. DISCONNECT RR ENGINE MOUNTING INSULATOR
(a) Remove the hole plugs.
(b) Remove the four nuts. and disconnect the mounting insulator.






33. REMOVE ENGINE MOUNTING ABSORBER
Remove the four bolts and engine mounting absorber.






34. DISCONNECT FR ENGINE MOUNTING INSULATOR
Remove the three bolts, and disconnect the mounting insulator.






35. ATTACH ENGINE SLING DEVICE TO ENGINE HANGERS






36. REMOVE ENGINE MOVING CONTROL ROD
Remove the three bolts and control rod.






37. REMOVE ENGINE AND TRANSAXLE ASSEMBLY FROM VEHICLE
(a) Lift the engine out of the vehicle slowly and carefully.

NOTICE: B. careful not to hit the PS gear housing or neutral start switch (A/T).
(b) Make sure the engine is clear of all wiring, hoses and cables.
(c) Place the engine and transaxle assembly onto the stand.
38. (A/T)
REMOVE STARTER
39. SEPARATE ENGINE AND TRANSAXLE M/T
A/T






40 REMOVE NO.2 RH ENGINE MOUNTING BRACKET
Remove the three bolts and nut, RH engine mounting stays and engine mounting bracket.






41. REMOVE FR ENGINE MOUNTING INSULATOR
Remove the three bolts and mounting insulator.






42. REMOVE RR ENGINE MOUNTING INSULATOR
Remove the four bolts and mounting insulator.