Clutch Unit Removal

CLUTCH UNIT REMOVAL





1. REMOVE TRANSAXLE FROM ENGINE





2. REMOVE CLUTCH COVER AND DISC
(a) Place matchmarks on the flywheel and clutch cover.

(b) Loosen each set bolt one turn at a time until spring tension is released.

(c) Remove the set bolts, and pull off the clutch cover with the clutch disc.

NOTICE: Do not drop the clutch disc.





3. REMOVE RELEASE BEARING AND FORK FROM TRANSAXLE
(a) Remove the release bearing together with the fork and then separate them.

(b) Remove the boot.