Removal and Installation

REMOVAL
1. Disarm air bag system as described under "Air Bag System Disarming & Arming.
2. Ensure steering wheel is in straight-ahead position, then use a suitable Torx wrench to loosen air bag retaining screws, Figs. 3 through 6.

Fig. 3 Driver's Air Bag & Spiral Cable Replacement:

Fig. 4 Driver's Air Bag & Spiral Cable Replacement:

Fig. 5 Driver's Air Bag & Spiral Cable Replacement:

Fig. 6 Driver's Air Bag & Spiral Cable Replacement:

3. Carefully pull air bag from steering wheel, then disconnect electrical connector. Store air bag with pad facing upward.

INSTALLATION
1. Connect air bag electrical connector, then position air bag to steering wheel.
2. Install air bag to wheel retaining screws and tighten to specifications.
3. Arm SRS as described under Air Bag Disarming & Arming.