Headlamp: Service and Repair

HEADLIGHT HEADLIGHT REPLACEMENT

1. REMOVE HEADLIGHT






(a) Remove the battery (LH) or disconnect negative terminal (-) from the battery (RH).

CAUTION: Work must be started after approx. 90 seconds or longer from the time the ignition switch is turned to the "LOCK" position and negative (-) terminal cable is disconnected from the battery.

(b) Remove fender liner.
(c) Remove a screw and two nuts.
(d) Disconnect connector.
(e) Remove headlight (Low Beam).
(f) Disconnect connector.
(g) Remove a bolt.
(h) Remove front bumper.
(i) Remove a clip and two screws.
(j) Remove the headlight. (Hi-Beam)






2. INSTALL HEADLIGHT
For installation, follow the removed procedure in reverse.