Service Hints

C 2 CRUISE CONTROL ACTUATOR
1-3: Approx. 2 K Ohms
5-4: Approx. 38 Ohms

C11 CRUISE CONTROL SW MAIN [COMB. SW]
15-20: Continuity with Main SW ON
20-17: Approx. 418 Ohms with cancel SW ON
Approx. 68 Ohms with Resume/Accel SW ON
Approx. 198 Ohms with Set/Coast SW ON

C14 CRUISE CONTROL ECU
14-GROUND: Approx. 12 Volts with Ignition SW at ON position
1, 15-GROUND: Always approx. 12 Volts
20-GROUND: 4 pulse with 1 rotation of Rotor Shaft (Drive Slowly)
18-GROUND: Approx. 418 Ohms with Cancel SW ON in control SW
Approx. 68 Ohms with RES/ACC SW ON in control SW
Approx. 198 Ohms with Set/Coast SW ON in control SW
13-GROUND: Always Continuity
2-GROUND: Continuity with Shift Lever at P or N position