Toe-In

INSPECT TOE-IN









If the toe-in is not within the specification, adjust it at the No.2 lower suspension arm.

ADJUST TOE-IN





(a) Measure the length of the left and right No.2 lower suspension arms.

Left - right difference: 1.0 mm (0.039 in.) or 1ess

If the left-right difference is greater than the specification, adjust the length.





(b) Loosen the lock nuts.





(c) Turn the left and right adjusting tube an equal amount to adjust toe-in.

HINT: One turn of the one side adjusting tube will adjust the toe-in about 0.60° (6.7 mm, 0.264 in.).

(d) Torque the lock nuts.
Torque: 56 N.m (570 kgf.cm, 41 ft.lb)