Service Specifications
DIFFERENTIAL ASSEMBLYDrive pinion preload (at starting):
New bearing 1.0 - 1.6 Nm, 10 - 16 kgf.cm, 8.7 - 13.9 inch lbs.
Reused bearing 0.5 - 0.8 Nm, 5 - 8 kgf.cm, 4.3 - 6.9 inch lbs.
Total preload (at starting):
New bearing Drive pinion preload plus 0.3 - 0.4 Nm, 2.8 - 4.4 kgf.cm, 1.2 - 1.9 inch lbs.
Reused bearing Drive pinion preload plus 0.1 - 0.2 Nm, 1.4 - 2.2 kgf.cm, 1.2 - 1.9 inch lbs.
Pinion to side gear backlash 0.05 - 0.20 mm (0.0020 - 0.0079 inch)
Side gear thrust washer thickness:
1.60 mm (0.0630 inch)
1.70 mm (0.0670 inch)
1.80 mm (0.0709 inch)
Side Bearing Adjusting Shim Selection:
Mark Shim Thickness
0 2.00 mm (0.0787 inch)
1 2.05 mm (0.0807 inch)
2 2.10 mm (0.0827 inch)
3 2.15 mm (0.0846 inch)
4 2.20 mm (0.0866 inch)
5 2.25 mm (0.0886 inch)
6 2.30 mm (0.0906 inch)
7 2.35 mm (0.0925 inch)
8 2.40 mm (0.0945 inch)
9 2.45 mm (0.0965 inch)
A 2.50 mm (0.0984 inch)
B 2.55 mm (0.1004 inch)
C 2.60 mm (0.1024 inch)
D 2.65 mm (0.1043 inch)
E 2.70 mm (0.1063 inch)
F 2.75 mm (0.1083 inch)
G 2.80 mm (0.1102 inch)
H 2.85 mm (0.1122 inch)