Exhaust Pipe - Protector & Clamp Available Separately

REF.: ENGINE

NO.: EG002-96

DATE: APRIL 19, 1996

MODEL: ES 300

Title: EXHAUST PIPE PROTECTOR AND CLAMP

For ES 300s with 1MZ-FE engines, exhaust pipe protectors and clamps are now available as separate supply parts. Part numbers and installation instructions for these parts are provided below.





PART NUMBER INFORMATION:

REPLACEMENT PROCEDURE:

Install protector so there is no noticeable gap or interference between exhaust pipe and protector.

Torque: 1 00 kgf-cm (7 ft-lbs)