Four Piston Caliper

Fig. 4. Disc Brake Assembly:

Fig. 7 Brake Pad Access:

1. Remove wheel.
2. Remove the bottom caliper bolt, Fig. 4, and turn caliper up, Fig. 7.
3. Remove the following:
a. Clip and two pins.
b. Anti-rattle springs.
c. Two pads.
d. Clip and disc wear indicator from inner pad of right wheel.
e. Spacer and anti-squeal shims.
4. Install pads as follows:
a. Install wear indicators on pads.
b. Apply disc brake grease to both anti-squeal shim. Then install shims on each pad.
c. Install pads with wear indicators facing downward.
d. Install anti-squeal springs.
5. Remove small amount of brake fluid from reservoir.
6. On models equipped with four piston calipers, use suitable monkey wrench handle to push piston in.
7. Install calipers and bolts. Tighten to specifications.
8. Ensure brake fluid is at Max line.